My projects

XTR Series Installation Manual

There are various types of installations for the XTR series. Below are the different options easily described, step by step, for a smooth and correct installation.

Please choose installation type from below:

Choose the mounting option according to the ceiling type; for drywall or a concrete ceiling, choose J-Box installation or Acoustic for T-bar ceilings like Armstrong.

Acoustic Ceiling installation options

Acoustic ceiling installation with T-clip

A - 2 x Aircraft cables 16ft
B- 2 x Aircraft cable caps
C- 2 x Grippers
D- 1 x Cable bushing
E - 2 x J-box canopies
F - 2 x T-clips with extra security
G - 2 x T-clips
H - 2 x holder bolts Standard
I - 2 x holder bolts Large

Step 1 - Getting ready

Prior to installation, make sure nothing is missing from the list above; the electrical power is off, and necessary tools are handy.

Step 2(a) - Preparing the standard T clip

Piece together the T Clips, and insert a holder bolt into each of them.

Step 2(b) - Preparing secured T clip

Piece together the T Clips, and insert a holder bolt into each of them.

Step 3 - Preparing Suspension

Attach the aircraft cables to the mounting brackets, on the XTR fixture, and screw the gripper in the center hole all the way in. Make sure it's in all the way, tight and secure.

Step 4 - Taking Measurements

Measure the length between the mounting brackets. This will give you the measurements for the placements of the T-clips.

Step 5 - Attaching the T clips

Attach the clips to the ceiling’s marked spots with the correct measurements from step 4.

Step 6 - Connecting it all together

Insert the cable bushing into the canopy - run the cable through the canopy, into the ceiling, and run it to the nearest J-box.

Step 7 - Securing the Canopy

Cover T clip with canopy, so T clip bolt sticks out. Attach the aircraft cable cap to the T clip bolt.

Step 8 - Adjusting the height and level

Push the aircraft cable into the gripper on the mounting bracket to adjust the desirable length, making sure the lighting fixture is level.

Step 9 - Complete installation

When the desired height of the fixture is secured, cut the excess aircraft cable.

Acoustic ceiling installation with T-support

A - 2 x Aircraft cables 16ft
B- 2 x Aircraft cable caps
C- 2 x Grippers
D- 1 x Cable busing
E - 2 x J-box canopies
F - T-support

Step 1 - Getting ready

Prior to installation, make sure nothing is missing from the list above; the electrical power is off, and necessary tools are handy.

Step 2 - preparing the suspension

Attach the aircraft cables to the mounting brackets by screwing the gripper in the center hole of the bracket.

Step 3 - Measuring the distance

Measure the length in between the mounting brackets. This will give you the distance for the placements of the T-support bar on the grid.

Step 4 - Determining the location

Determine the desired location for the fixture under the drop ceiling in between the grids

Step 5 - Placing the t-support

Snap the t support on the grid and secure it with the screw. Make sure the t support sits firmly on the grid before screws fastening.

Step 6 - Placing a tile

Bring the tile to the t-support and mark the spot for hanger bolt. Pierce through the tile at the marked spot. Make sure it's wide enough for the hanger bolt to come through. Place the ceiling tile.

Step 7 - Assembling the canopy

Insert the cable bushing into the canopy - run the cable through the canopy, into the ceiling, and run it to the nearest J-box.

Step 8 - Attaching the aircraft cable

Insert the canopy plate through the hanger bolt tight against the ceiling panel, and screw the aircraft cable cap on it.

Step 9 - Adjusting the heights

Push the aircraft cable into the gripper on the mounting bracket to adjust the desirable length, making sure the lighting fixture is leveled.

Step 10 - Complete installation

When the desired height of the fixture is secured, cut the excess aircraft cable.

How to install XTR Linear Light series by CENTERLIGHT

Two preinstalled octagon shape j-boxes or j-box with round cover recommended for the proper and clean installation.

A -2 x J-Box canopies
B- 2 x Mounting plates
C- 2 x Hanger bolts
D- 2 x Cable retainers
E -1 x Cable busing
F - 2 x Aircraft cables 16ft
G - 2 x Aircraft cable caps
H - 2 x Grippers

Step 1 - Getting ready

Prior to installation, make sure nothing is missing from the list above; the electrical power is off, and necessary tools are handy.

Step 2 - Preparing the mounting plates

Insert the hanger bolt into the cable retainer, and screw it through the mounting plate.
Fit the cable bushing on the canopy plate with the power feed opening.

Step 3 - Taking measurements

Measure the desired height from the fixture to the ceiling. The aircraft and power feed cables are 16 ft long and the fixture can be placed within that distance.

Step 4 - Securing the cable

Pull the feeding cable through the cable bushing and the mounting plate. Secure at least 6 inches of the line on the mounting plate in the cable retainer using two small screws.

Step 5 - Wiring

Connect the feeding cable wires according to the preinstalled electrical wires inside the J-box

Step 6 - Secure mounting plate

Fasten the mounting plate to the J-box with provided screws.

Step 7 - placing the canopy

Insert the canopy cover plate through the hanger bolt and securely place it on the j-box.

Step 8 - Suspend

Attach the aircraft cable by screwing the cable cap onto the hanger bolt.

Step 9 - attaching the aircraft cable

Screw the gripper in the center hole of the bracket, all the way in. Make sure it’s in all the way, tight and secure. Push the aircraft cable in to adjust the desirable length, ensuring that the fixture is level.

Step 10 - Adjust height and level

Adjust level and height

Step 11 - Final Adjustments

Ensure that the fixture is level, cut and discard unnecessary length of aircraft cable. Clean the fixture. The installation is complete.

Acoustic ceiling installation with T-clip

A: Aircraft cable 16ft. B: Aircraft cable caps. C: Grippers D: Mounting brackets and bracket pins E: Cable bushing. F: J-Box CanopiesG: T clips with extra security. H: Standard T clips. I: Large hanger boltsJ: Standard hanger bolts

Step 1

Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.

Step 1

Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.

Rts series installation

Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.

Rts series installation

Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.

Step 1

Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.

Step 1

Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.

Step 7

Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.