There are various types of installations for the QUATTRO series. Below are the different options easily described, step by step, for a smooth and correct installation.
Choose the mounting option according to the ceiling type; for drywall or a concrete ceiling, choose J-Box installation or Acoustic for T-bar ceilings like Armstrong.
Equipment List:
A -2 x aircraft cable 16ft
B- 2 x aircraft cable caps
C- 2 x Suspension support
D- 1 x Power Cord
E - 1 x cable bushing
F - 2 x j-Box canopies
G - 2 x T-clips with extra security
H - 2 x T-clips
I - 2 x holder bolts Large
J - 2 x holder bolts Standard
Prior to installation, make sure nothing is missing from the list above; the electrical power is off, and necessary tools are handy.
.png)
Find the connector compartment on one side of the fixture. Unscrew the lid and detach it.
.png)
Connect male and female connectors and fit them into the compartment. Reattach the lid again and screw it closed.
Screw a holder bolt on to the clip.
Piece together the T Clips, and insert a holder bolt into each of them.
.png)
Attach the two aircraft cables to the holder bolts on each side of the fixture. Push the aircraft cable into the gripper to adjust the desirable length, ensuring that the lighting fixture is level.
.png)
Measure the length between the mounting brackets. This will give you the measurements for the placements of the T-clips.
Attach the clips to the ceiling’s marked spots with the correct measurements from step 6.
Insert the cable bushing into the canopy - run the cable through the canopy, into the ceiling, and run it to the nearest J-box.
Cover T clip with canopy, so T clip bolt sticks out. Attach the aircraft cable cap to the T clip bolt.
.png)
Push the aircraft cable into the gripper on the mounting bracket to adjust the desirable length, making sure the lighting fixture is level.
.png)
When the desired height of the fixture is secured, cut the excess aircraft cable.
Equipment List:
A -2 x aircraft cable 16ft
B- 2 x Aircraft cable cap
C- 2 x Suspension support
D- 1 x Power Cord
E - 1 x cable bushing
F - 2 x j-Box canopies
G - 2 x T-Support
Prior to installation, make sure nothing is missing from the list above; the electrical power is off, and necessary tools are handy.
Find the connector compartment on one side of the fixture. Unscrew the lid and detach it.
Connect male and female connectors and fit them into the compartment. Reattach the lid again and screw it closed.
.png)
Screw a holder bolt on to the bracket
Attach the two aircraft cables to the holder bolts on each side of the fixture. Push the aircraft cable into the gripper to adjust the desirable length, ensuring that the lighting fixture is level.
Measure the length between the mounting brackets. This will give you the measurements for the placements of the T-support and the canopies.
Determine the desired location for the fixture under the drop ceiling in between the grids using the measurements from step 6.
.png)
Attach the clips to the ceiling’s marked spots with the correct measurements from step 6.
Bring the tile to the t-support and mark the spot for the hanger bolt. Pierce through the tile at the marked spot. Make sure it's wide enough for the hanger bolt to come through. Replace the ceiling tile.
Insert the cable bushing into the canopy - run the cable through the canopy, into the ceiling, and run it to the nearest J-box.
Cover T clip with canopy, so T clip bolt sticks out. Attach the aircraft cable cap to the T clip bolt.
Push the aircraft cable into the gripper on the mounting bracket to adjust the desirable length, making sure the lighting fixture is level.
When the desired height of the fixture is secured, cut the excess aircraft cable.
Two preinstalled octagon shape j-boxes or j-box with round cover recommended for the proper and clean installation.
A: j-box cover plate, B: mounting plates, C: hanger bolts, D: cable retainer, E: cable bushing, F: mounting brackets, G: bracket pins, H: aircraft cable caps, I: grippers, J: aircraft cable 16ft
Prior to installation, make sure nothing is missing from the list above; the electrical power is off, and necessary tools are handy.
Find the connector compartment on one side of the fixture. Unscrew the lid and detach it.
Connect male and female connectors and fit them into the compartment. Reattach the lid again and screw it closed.
.png)
Insert the cable retainer onto the hanger bolt and screw it through the mounting plate. Fit the cable bushing on the power feed canopy plate for the fixture's cable.
Attach the two aircraft cables to the holder bolts on each side of the fixture. Push the aircraft cable into the gripper to adjust the desirable length, ensuring that the lighting fixture is level.
.png)
Measure and mark the desired area you want to mount the fixture, then measure the height from the fixture to the ceiling. The aircraft and power feed cables are 16 ft long and the fixture can be placed within that distance.
.png)
Pull the feeding cable through the cable bushing and the mounting plate. Secure at least 6 inches of the line on the mounting plate in the cable retainer using two small screws.
.png)
Connect the feeding cable wires according to the preinstalled electrical wires inside the J-box.
.png)
Fasten the mounting plate to the J-box with provided screws.
Insert the canopy cover plate through the hanger bolt and securely place it on the J-box.
Cover T clip with canopy, so T clip bolt sticks out. Attach the aircraft cable cap to the T clip bolt.
Push the aircraft cable into the gripper on the mounting bracket to adjust the desirable length, making sure the lighting fixture is level.
When the desired height of the fixture is secured, cut the excess aircraft cable.
A: Aircraft cable 16ft. B: Aircraft cable caps. C: Grippers D: Mounting brackets and bracket pins E: Cable bushing. F: J-Box CanopiesG: T clips with extra security. H: Standard T clips. I: Large hanger boltsJ: Standard hanger bolts
Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.
Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.
Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.
Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.
Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.
Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.
Our lighting fixtures designed specifically for our MAGfinity track lighting system are a variety of designer luminaries for different functions and looks. Very easy to install.
.svg)
